Maintenance And Specification For Rigid X Tile
Cleaning And Maintenance
Keeping X Tiles in good condition is simple and straightforward.
The impervious surface of X Tile needs only a damp mopping machine or hand scrub to remove most forms of dirt.
For further protection of the tiles, 2 or 3 coats of a sealer may be applied after installation.
A full maintenance and cleaning programme is available, please ask.
Technical Specifications
| Attribute | Standard | Specification |
Tile Dimensions | | 501 x 501 x 7mm |
Material | | PVC SGI1.45 |
Hardness | ISO868 | 92 (Shore A) |
Abrasion | DIN53504 | 17 Nmm2 |
Wear Resistance | DIN53516 | 60.6 mm3 |
Flame Spread | DIN51960 | Class 1 (A/NFPA 235 1995 Critical Rad Flux) |
Fire Resistance | NSI/ASTM E648 979 | Class 1 (Ohms) |
Electrical Resistance | DIN 53582 | 1 x 10 Co-efficient of Friction |
Anti-slip | ASTMC 1028/89 | Good |
Dimensional Stability | NF EN404 | 0.40% |
Chemical Resistance | DIN 51958 - Hydrochloric Acid - 96%
Ethanol - 96% Methanol - 100% Acetic Acid - 100% Nitric Acid - 69%
Sulphuric Acid - 98% Chromic Acid - 40%
Toluene, Trichloethulene, Acetone, Engine Oils, Gasoline, Urine |
Standard Indentation | NF EN 433 | 0.11mm (under load)
0.01mm (load removed) |
Anti-Static | | Special 1x10 |
UV Stability | | Good |
In areas of direct sunlight the tiles may also need to be glued.
Anti-static tiles available in all colours.
For use outside, UV stabiliser can be added to protect tile from fading during outdoor use.
|
Click images for larger picture
Frank says...
X Tiles are tough, versatile, easy to fit (with little or no downtime) and excellent value for money.
More free carpet and flooring advice
|